Details of the hot gas recycling system of oil skin machine

The yuba or oil skin is generally processed by a yuba oil skin machine.In the process, the soybean milk is injected into the soybean milk tank.The heating system at the bottom of the soybean milk tank provides a certain temperature for the soybean milk tank to form a skin on the surface of the soybean milk tank. The conveyor belt system conveys the peeled pulp to the subsequent process.

In the above processing, the soy milk in the soy milk tank will generate a lot of hot air, which will be emitted to the workshop, which will cause the temperature and humidity of the workshop to rise, which will deteriorate the operating environment of the workshop.

The purpose of this article is to provide a hot gas recovery and reuse system on a yuba oil skin machine to avoid the heat generated by soymilk from being distributed to the workshop and affecting the operating environment, and to realize the recovery and reuse of hot gas and improve energy efficiency.

The technical solution is as follows: the yuba oil skin machine has at least a soybean milk tank that accommodates soybean milk and generates a pulp skin on the surface of the soybean milk. The special feature is that the hot gas recovery and reuse system includes collection hoods arranged on both sides of the top plate above the soymilk trough. ), The collecting port of the collecting hood is connected to the two coils in the hot air blower through the pipeline.

The hot air fan has a coil connected to the high-temperature steam and two coils connected to the collecting hood.

The pipeline connecting the collecting hood and the two coils is set as an elastic telescopic tube between the collecting port of the collecting hood and the rack.

The gas support rod is located below or above the collection hood.

The collecting hood is located above the rear section of the soybean milk tank. The overall length of the collecting hood is 1 / {{{{{2}}}} to 1 / {{3} of the length of the soybean milk tank } (Because the surface of the soybean milk tank in the front section of the soybean milk tank has formed a pulp skin, the heat emitted by it is significantly reduced compared to the rear section of the soybean milk tank.